Technical Parameters

Type：Fiber laser
Wavelength：1064nm
Power：500W

Process：bi-directional scraper paving
Normal Build：0.05mm
Quick Build：0.05~0.15mm
Precision Build：0.02~0.05mm

Beam (diameter@1/e2):0.06~0.20mm
Scanning Galvanometer：High Speed Scanning Galvanometer
Parts Scanning Speed：1.0~4.0m/s (recommended)
Blank Jumping Speed：10.0m/s (recommended)
Reference Building Speed：4~20cm³/h

Protective gas：N2 / Ar
Flow Control：0~3 L/min intellient adjustment
Dust extraction control：High efficiency Protection recycling system

Volume：Approx. 25L
Size：300mm(X) × 250mm(Y) × 350mm(Z)
Max Weight：70kg
Type：Precision resistor heater
Materials：Stainless Steel / Die Steel / Titanium Alloy / Aluminium Alloy / Co-Cr Alloy / Nickel Alloy / Cuprum etc.

Network：Ethernet, TCP/IP, IEEE802.3
Control Software：iSLM(Presto SLM)
Date Preparation Software：3dMagic
Data Interface：CLI file, SLC file, STL file

Power：200~240VAC 50/60Hz, single phase, 25Amps
Ambient Temperature：20-26ºC
Relative Humidity：Less than 40%, non-condesing
Size：1.70m(W)×1.40m(D)×2.20m(H)(Operating computer is not included) Weight：Approx. 1500kg

Laser：5000 hours or 12 months (whichever comes first)
Main Machine：12 months from installation date