Wiiboox Light 280 LCD 3D Printer

Wiiboox Light 280

LCD Light Curing Resin 3D Printer

More Than Big

This is a Formula One racing car model with a length of 280mm.
Before the launch of Wiiboox Light Pro+ LCD 3D Printer, you can only print this kind of large-size and high-precision 3D model with industrial-grade SLA 3D Printer. Or you have to lower your requirements on precision to choose the FDM technology. Now, you can have a new choice -- large size, high precision, lowe-cost investment and easy operation.

Breeze Through T15 Precision Test 

T15 Precision Test is a challenge that all Wiiboox Light series LCD 3D Printers must pass before leaving the factory. In this small space of 60*36*3mm, 15 challenging models lined up, especially the T15-7 and T15-8, the smallest space in between is only less than 0.1mm. Many devices have failed in the chanllenge, but Wiiboox Light makes it!

Outstanding Details
Makes the Flower Blooming

This is a coin-sized model printed by the Wiiboox Light Pro+ LCD 3D Printer, pictures shot by a macro camera. This blooming flower with fine lines in the middle of the grid and a diameter of about 0.1mm, even if it is magnified hundreds of times through the camera lens, it still looks clear, distinct and sharp.If you put it under the light, all the details will be more crystal clearer, and this is what Wiiboox Light 280’s interpretation of fineness and delicacy.

Such Delicate Dental Models
120 Pieces for One-Time Printing

Pour the dental model resin into the Wiiboox Light Pro+, set the printing precision into 0.08mm, place 24 models per layer and 5 layers to full the build volume. That’s 120 dental models in total! And it takes only 16 hours to print all of them. Isn’t it increadibale?

Only 3.5-Hours to Duplicate the Tiger Bracelet

Digital Intelligent Manufacturing Solution Using Wiiboox Reeyee 3M & Wiiboox Light Pro+
It takes only 3.5 hours to duplicate this bracelet. After capturing the high-precision 3D data with the Wiiboox Reeyee 3M Blue Light 3D Scanner, we can duplicate the tiger bracelet using the Wiiboox Light Pro+ LCD 3D Printer. Take a look at the dot patterns on the bracelet with a depth of only 0.3mm, which has been faithfully restored no matter in the 3D scanning process or the 3D printing proces. So it’s definitely reliable to use Wiiboox Reeyee 3M and Wiiboox Light Pro+.

  • Wiiboox Reeyee 3M

  • Wiiboox Light Pro+

Optimal User Experience
Comes From 996

9 times of optimized operation logic, 9-week UED design, 6 versions to be picked over , all for achieving a best user experience design. It might not be so perfect, but at least it is attentive. Operation steps, file information, printing progress, WIFI control, automatic feeding, and so on, every single detail, we do our best to make it easier for you.

Free Switch Between Auto Feeding and Manual Feeding

The Wiiboox Light Pro+ LCD 3D Printer is equipped with an intelligent automatic feeding system. When the liquid level sensor detects that the resin is below the bottom limit, the feeding system will automatically run to replenish the resin to a proper height. Of course, if you want to try the feeling of manual refilling, you can manually turn off the auto feeding system, clean the resin tank and pour in new resin. The original resin can be left in the feeding system and used when needed.
(Note: The two resins cannot be mixed)

High-cost of Z-axis Lifting System Brings High Precision

The Z-axis lifting system of Wiiboox Light Pro+ LCD 3D Printer adopts the high-precision ball screw and linear guide module, which is rare in LCD 3d printers, because the unit cost is 5 times higher than that of using only linear guideway. However, we think it’s worth it. How can we do without paying the price, if we want to be a master?

15 Kinds of Resins,
Freedom of Creation

At present, there are 15 kinds of colorful resins available for the Wiiboox Light Pro+ LCD 3D Printer. With the research and development day and night, there will be more and more kinds of resins, applicated in more and more fields.

Leveling, Once for All

You only need to level the platform according to the instructions when the Wiiboox Light Pro+ LCD 3D Printer is running for the first time. The platform will automatically level according to the elastic compensation in subsequent use, so that you don't have to go to the trouble of leveling every time before you start printing.

High Uniformity of Light,
High Printing Success Rate

The Wiiboox Light Pro+ LCD 3D Printer is equipped with the 405nm ultraviolet LED array, whose light uniformity is more than 85%, which can effectively increase the printing success rate and prolong the service life of the LCD module.

Stable Structure & Humanized
Design, Better User Experience

The stable and firm structure makes the printing process very smooth. The humanized upturing front cover design brings a wider range of operating space.

Compatible with a Variety of Resins,
More Colorful Creations

The Wilboox Light Pro+ LCD 3D Printer supports printing rigid resin, tough resin, hard resin, casting resin, elastic resin, high temp. resin, etc., and it can be applied in a variety fields like jewelry design, dental orthodontics, DIY action figures and prototype verification.

  • Model: Automotive Engine Trunking

    Material: ABS resin

    Total Weight: 400g

    Time: 13 hours and 30 minutes

    Advantages: Accurate molding size, Low shrinkage, can be used for design verification

  • Model: Adult Tooth Model

    Material: Dental model resin

    Total Weight: 673g

    Time: 16 hours and 33 minutes

    Advantages: Low heat, High hardness, Suitable for invisible correction and other dental restoration

  • Model: Gamepad Shell

    Material: Rigid resin

    Total Weight: 267g

    Time: 6 hours and 32 minutes

    Advantages: Low heat, High hardness, Suitable for invisible correction and other dental restoration

  • Model: Peacock

    Material: Rigid resin

    Total Weight: 216g

    Time: 5 hours and 30 minutes

    Advantages: Smooth surface, Rich details

  • Model: Famous architectures

    Material: Rigid resin

    Total Weight: 260g

    Time: 6 hours and 27 minutes

    Advantages: Smooth surface, Rich details

  • Model: Statue of Liberty

    Material: Rigid resin

    Total Weight: 180g

    Time: 4 hours and 26 minutes

    Advantages: Smooth surface, Rich details

  • Model: Gear

    Material: ABS resin

    Total Weight: 960g

    Time: 23 hours and 30 minutes

    Advantages: Accurate molding size, Low shrinkage, can be used for design verification

  • Model: Deer

    Material: Rigid resin

    Total Weight: 120g

    Time: 2 hours and 56 minutes

    Advantages: Smooth surface, Rich details